Oval Racing

View as Grid List
Sort by
Display per page

Lucas Style Battery Isolator Switch

This Lucas style battery cut out switch is made in the same `Lucas` style as the switch that has been used by generations. A twin terminal design with a ceramic base, metal body and T-bar style switch.
£12.50 excl vat

Otto Racing TX1 Digital Recall Tacho

Compact Digital Tacho with Maximum RPM recall Battery Voltage Readout 100% Waterproof
£125.00 excl vat

Stainless Steel Sliding Bonnet Pin Kit

These Competition Quick Release Steel Bonnet Pins feature captive slide pins and 7/16" UNF shank thread. Sold In Pairs.
£7.92 excl vat

Castrol React Performance Dot 4 Brake Fluid

Castrol Response DOT 4 brake fluid is specially formulated to meet the demanding requirements of modern high performance brake and clutch systems with the exception of vehicles with mineral oil systems. Castrol Response has a boiling point of 265 degrees celcius which enables the fluid to operate at a high level throughout its service life, offering system protection together with ultimate braking confidence. It is recommended that the brake fluid is to be changed every two years to optimise braking performance.
£12.50 excl vat

Facet 40106 Solid State Fuel Pump & Unions

These solid-state technology electronic fuel pumps provide outputs up to 132.5 liters/hour and .68 bar. Facet/Purolator Cube Fuel Pumps are self-priming with a dry lift capacity of 120 inches. Two universal models provide complete coverage for all low and high-pressure carburetor applications for cars, vans, RV’s, and light trucks, in addition to many diesel applications. All models of the Facet/Purolator Cube Fuel Pumps are compatible with gasoline, diesel, biodiesel, blended alcohol fuels, and fuel additives. Specification:- Fast Road Pump:- 40106 Voltage:- 12v Earth:- Neg Pressure (Psi):- 4.0-7.0 Flow:- US Gallons/Hr 32 Dry Prime Height in Mtrs:- 0.3 Thread Size:- 1/8th nptf Average Run Time or MTBF:- 6000 hrs Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal
£57.50 excl vat

8mm Stainless Steel Braided Fuel Hose

Priced per metre
£10.00 excl vat

10" Wide Steel Trailer Arch

10" wide by 29.5" tip to tip. Please note shipping is to UK Mainland only, please call 01354 688111 to order for N Ireland
£37.50 excl vat

Steel Side Skirt

1850mm Long 105mm Wide 1.5mm Thick
£29.17 excl vat

Facet Red Top Cylindrical Fuel Pump & 90 Deg Unions

Facet 480532 Red Top Cylindrical Fuel Pump - RTW506 Specification:- Competition Pump:- 480532E Voltage:- 12v Earth:- Neg Pressure (Psi):- 6.0-8.0 Flow:- US Gallons/Hr 40 Dry Prime Height in Mtrs:- 0.6 Thread Size:- 1/4 npt Operating Temperature:- -40º to +180° F (all Models) Average Run Time or MTBF:- 6000 hrs Legal Requirements:- Certified & Complies With EEC 95/54 Requirements Length:-140mm Diameter:- 54mm Weight:-0.7kg Fuel Union Installation:- When fitting fuel unions, either wrap PTFE tape around the threads or use Loctite 243 to create a fuel proof seal
£107.50 excl vat

Malpassi 67mm Filter King With Alloy Bowl 8mm Unions

These fuel pressure regulators have been part of a competition fuel system, and a common sight on motorsport vehicles over the past 25 years. The FILTER KING is a popular unit, regularly seen in the motorsport field because of its ability to regulate and filter fuel without restriction. Height:- 120mm Width:- 100mm Weight:- 370 gms Filter Micron:- 10 Unions:- 8mm Pressure Range:- 1-7 psi
£55.00 excl vat

5.5x13 RFX - Stock Rod

ET49 Vauxhall Fitment for use on the drivers side of Stock Rods - These are due back in stock at the end of March
£120.00 excl vat

8x13 CXR - 2.0 Hot Rod

Available in 108mm and 146mm backspace. Anthracite Grey only
£160.00 excl vat

10x13 - Classic Hot Rod

Classic 4 spoke race wheel, 4x108, 100mm backspace. Uses standard wheel nuts
£185.00 excl vat

GAZ Gold Pro F2 Stock Car - Shale

Aluminium bodied shock valved to our specifications for Brisca F2 Shale Racing
£150.00 excl vat