Classic Hot Rods/2.0 Hot Rods

2.0 Hot Rods

View as Grid List
Sort by
Display per page

TRS 75mm (3") Nascar Harness - 5 Point - Superlite

The same as the standard 3" Nascar Harness but fitted with the Aluminium shoulder adjusters which are lighter and much smoother to adjust
£125.00 excl vat

3J Driveline Gear Kit - National Hot Rod Ratio's

Original ratio's for National Hot Rods, now mainly used in 2.0 Hot Rods and Classic Hot Rods. Ratio's = 1st-2.48, 2nd-1.69, 3rd-1.61
£975.00 excl vat

Castrol B373 LSD Oil

Castrol B373 designed for use in Limited Slip Diffs
£10.42 excl vat

Screw In Quickshift Gearlever

Quickshift gear lever for 4 speed Ford Gearboxes
£37.50 excl vat

3 Bolt Fixing Quickshift Gearlever

3 bolt fixing Quickshift Gearlever for Sierra type boxes and our Quaife Tailhousing Kit's
£40.00 excl vat

HANS only - TRS 75mm Magnum Harness - 6 Point - FIA Approved

FIA approved 75mm 6 point saloon harness with steel adjusters on the shoulder straps and lap straps. 50mm upper shoulder straps for use only with HANS device, eyebolts included. • FIA approved 8853/98 Saloon Harness • 6 point snap hook fixings • 75mm shoulder and lap straps • 50mm upper shoulder straps • Steel adjusters on lap and shoulders • HANS ONLY
£175.00 excl vat

TRS 75mm Magnum Harness - 6 Point - FIA Approved

FIA approved 75mm 6 point saloon harness. Suit saloon or GT car. Includes eyebolt's. • FIA approved 8853/98 Saloon Harness • 6 point snap hook fixings • 75mm shoulder and lap straps • Steel adjusters on lap and shoulders • HANS friendly
£175.00 excl vat

3/4" x 3/4" Oversized Rod end for Steering Column

2 Locknuts are included
£10.42 excl vat

Allstar Performance Splined Quick Release Hub

Quick release hub allow easy installation and removal of three bolt style steering wheels, often used to ease the entering and exiting of vehicles. The splined steel coupling is bored to slip over a 3/4" steering column. Fits industry standard large 3 hole pattern. 3x 5/16" on a 1-3/4" Bolt Circle.
£60.00 excl vat

Joes Racing Quick Release Hub

Made from aircraft aluminum, JOES quick disconnects are pin-less and spring-loaded for fast steering wheel removal. The splined steel coupling is bored to slip over a 3/4" steering column. Fits industry standard large 3 hole pattern. 3x 5/16" on a 1-3/4" Bolt Circle.
£82.50 excl vat

Longacre Ignition and Start Switch

1 SWITCH DOES IT ALL! DOWN is off MIDDLE is Ignition On UP is momentary start Comes pre-wired with color coded harness, flip up switch cover. Simple to install.
£60.00 excl vat

Battery Isolator Switch

The On/Off switch is a twin contact battery isolation switch that will ensure complete electrical isolation of the vehicle when it is switched off, so it cannot be re-started.
£8.33 excl vat

Lucas Style Battery Isolator Switch

This Lucas style battery cut out switch is made in the same `Lucas` style as the switch that has been used by generations. A twin terminal design with a ceramic base, metal body and T-bar style switch.
£12.50 excl vat